Although you may think it is really more difficult than it really is, bench making can be done in 6 simple steps. After we have gathered the needed materials and tools we can do bench making in no time. We can make ourselves a nice, simple and safe wooden bench; one that will be both functional and beautiful and something you will be sure to get compliments on and a great conversation piece. After all, what's better than saying, Yeah, I made that!"
Bench making is easier with these six steps.
Bed Safety Rail
1. First, we start off by measuring the frame of the bench seat to our desired dimensions, cut them, and then tack-nail them together. Bench making includes drawing a curve line on the side pieces lengthways and cutting them using a jigsaw before attaching them together. This forms the seat shape. We may also form it as we see fit.
Then cut and sand the seat slats and mark their face boards. Screw the seat frame tightly together. Glue and nail the slats to the frame, beginning from the back. A ¾ inch vertical spacer will help. A good bench making design is providing a slight slat overhang on the front.
2. Second, we come to the screwing portion of bench making. Glue and screw front legs to our seat frame by first pre-drilling and applying countersink holes for screws to fit in. Do the same with the hind legs.
3. Third is sanding. Bench making is also about safety so we round sharp corners and sand the seat face and legs to smoothen all surfaces. This avoids board grains or fibers from sticking out and hurting the user. Sanding also creates better-looking seat surfaces.
4. Fourth, we deal with the back rest in bench making. Get the top rail measurement and add a space 5/8 inch from the rail top to the back part of the hind leg. This should give a 1/8 inch space at the bottom of the rail between the back part of the leg and the rail.
Then place the router tenons or tongues and vertical back slats on one end. There should be a fitting groove at the top rail. The tongues should easily fit into the groove. Glue the slats and nail them.
5. Fifth, bench making with armrests requires putting wood cleats 3 1/2 by 3/4 by 3'4 inches to support the front legs. Make a 3/16 inch hole with a drill at the midpoint of the cleat and have it attached through the bracing at the corner.
The armrest should measure from the back of the hind leg to some inches off the front leg. An armrest notch should receive the leg support of the back rest. Drill a hole and countersink atop the front cleat piercing the armrest then glue and screw.
6. Then, sixth is final sanding. Bench making should end with all surfaces, ends, and corners smoothen before painting. There we have our nice, simple, and sturdy bench.